23 Comments

1. 

   James on June 6, 2016 at 3:34 am

   Everything downloaded and installed fine. I am just unable to run it because I don’t know what to do with this:

   NOTE: The virtual machine network is configured to use Bridged
   Adapter, as a result it will be assigned an IP Address from your
   host computer network, please make the necessary changed to the
   virtual machine host file to reflect your environment/network.
   Knowledge of Oracle VirtualBox and the Linux operating system is
   assumed.

   Do you happen to have the instructions somewhere for download?

   Thanks!

2. 

   James on June 6, 2016 at 4:56 am

   Please disregard the message I just sent you. Page 10 of the read me made me think I had a problem with VB. I googled the issue and found out that virtualization had to be enabled on my BIOS. I’m in Linux now. Thanks for putting this out there!

3. 

   mitch on June 12, 2016 at 6:20 am

   Thanks for taking the time to put this together. I have tried several times to start the services, but every time I do this error appears: Internal Exception: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection
   Error Code: 17002

   I know you don’t support the VM, but had hoped somebody ran into this and had the fix. Thanks again for the work.
   Gavin

   • 

     Ben Mukoro on June 12, 2016 at 6:36 am

     Can you please post the output of the following command “ifconfig” along your /etc/hosts file..
     It appears you are having a network related problem..

4. 

   gavin on June 12, 2016 at 6:04 pm

   Ben,
   You gave me the answer! Yah, Host file had wrong IP.
   Thanks!!

   Gavin

   • 

     Ben Mukoro on June 13, 2016 at 1:06 pm

     No worries..

5. 

   Anil on June 28, 2016 at 9:32 pm

   Hello someone please help. node maanger not starting:
   following error log
   ………………….
   Domain name mappings:

   thanks in advance

   • 

     Ben Mukoro on June 28, 2016 at 10:21 pm

     Although I typically do not provide support, can you please provide a little bit more information? like what led to the error message?

     Thanks
     Ben

6. 

   Anil on June 29, 2016 at 6:12 pm

   Although I typically do not provide support, can you please provide a little bit more information? like what led to the error message?

   Thanks
   Ben

   Comment by Ben Mukoro on June 28, 2016 at 10:21 pm
   ———————————————————————
   Thanks a lot.
   I amusing Vbox installed on Windows10 Home.
   * imported the ova file into Vbox,
   *Changed network to Bridge adapter and under ‘Name’ selected the ethernet adapter on host.
   (in Advance section :Adapter type: Intel PRO/1000MR Desktop(82540OEM) & Promiscious Mode: Deny & Cable :Connected )
   *started the created VM and loggged into it .
   Opened cmd console.
   Chaned Directory to ………eppm domain/ bin
   command : $ nohup sh startNodeManager.sh & then CTRL+C
   tail -f nohup.out

   • 

     Ben Mukoro on June 29, 2016 at 6:26 pm

     Have you checked your network configuration and the /etc/host file; what is the assigned IP address given you are using the bridged network? is it the same as the IP address in the host file?
     Can you please post the output of the following command “ifconfig” along your /etc/hosts file..

     Thanks

     Ben

7. 

   Anil on July 2, 2016 at 5:52 pm

   Hello Ben,
   Thanks for your reply. now my system is up and running,
   Firstly i had issue in making the the connection itself and when i successfully made the connection, i followed your suggestion. copied the ip address to the host file and rest all was as per written process.
   I took quite some time to after trying few trials and good experience.

   Thanks a lot

   Anil

   ”””””””
   Have you checked your network configuration and the /etc/host file; what is the assigned IP address given you are using the bridged network? is it the same as the IP address in the host file?
   Can you please post the output of the following command “ifconfig” along your /etc/hosts file..

   Thanks

   Ben

   Comment by Ben Mukoro on June 29, 2016 at 6:26 pm

   Reply

8. 

   Paul on July 14, 2016 at 10:26 pm

   Can you post the instructions for changing the etc/hosts file. I don’t seem to have access to it as the ‘oracle’ user?

   Thanks

9. 

   Sadasivan on August 1, 2016 at 11:54 am

   Hello Ben,
   Thanks for this fully integrated VM..i have managed to run the node manager and started all managed servers as well. but Primavera analytics not running due to the application user and the password issues.(demouser &welcome1). My intention is to use P6 Analytics and OBIEE.
   regards
   Sada

10. 

    Chris Ledoux on August 11, 2016 at 4:50 pm

    First, thank you for putting together these VMs. They are fantastic.

    I have a colleague that is using this VM, but is limited to 16GB of RAM on his physical machine. That and he is trying to run EPPM, Analytics, and Unifier. This combo is consuming his RAM.

    We are wondering if we had a second physical machine, could we run the VM on both machines and have them use the same virtual network? The goal would be to have certain applications running on VM1 and others on VM2 to balance the load.

    Thank you again for the time and effort it took to build these VMs.

11. 

    Waranya on September 14, 2016 at 6:14 am

    Hello Ben,
    When I try to download part number 4 until number 8, It’s asking me for Username and password.
    Where I can get it ?

    Regards
    Waranya

    • 

      Ben Mukoro on September 14, 2016 at 9:09 am

      Hello Waranya

      No password required to download the files…simply click on the URL.

      Thanks

      Ben

12. 

    Imran on November 20, 2016 at 9:49 pm

    Hi,
    Please help the following error I have after running “/u01/app/oracle/config/domains/eppm_domain/bin/startNodeManager.sh”

    Nov 20, 2016 1:37:13 PM oracle.security.jps.internal.idstore.util.LibOvdUtil pushLdapNamesToLibOvd
    INFO: Pushed ldap name and types info to libOvd. Ldaps : u01apporacleconfigdomainseppm_domainconfigfmwconfigsystem-jazn-data.xmlidstore.xml.provideridstore.xml.
    [EL Severe]: ejb: 2016-11-20 13:39:13.703–ServerSession(1134924425)–Exception [EclipseLink-4002] (Eclipse Persistence Services – 2.5.2.v20140319-9ad6abd): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection
    Error Code: 17002
    [EL Severe]: ejb: 2016-11-20 13:41:13.836–ServerSession(1134924425)–Exception [EclipseLink-4002] (Eclipse Persistence Services – 2.5.2.v20140319-9ad6abd): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection
    Error Code: 17002

    my ifconfig is

    [oracle@primavera-vm ~]$ ifconfig
    eth0 Link encap:Ethernet HWaddr 08:00:27:83:D1:19
    inet addr:192.168.0.55 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fd07:ecb5:93bd:0:a00:27ff:fe83:d119/64 Scope:Global
    inet6 addr: fe80::a00:27ff:fe83:d119/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:338 errors:0 dropped:0 overruns:0 frame:0
    TX packets:461 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:31200 (30.4 KiB) TX bytes:36292 (35.4 KiB)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:400 errors:0 dropped:0 overruns:0 frame:0
    TX packets:400 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:25224 (24.6 KiB) TX bytes:25224 (24.6 KiB)

    [oracle@primavera-vm ~]$

    My /etc/hosts file..

    # Copyright (c) 1993-2009 Microsoft Corp.
    #
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    #
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    #
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a ‘#’ symbol.
    #
    # For example:
    #
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host

    # localhost name resolution is handled within DNS itself.
    # 127.0.0.1 localhost
    # ::1 localhost
    192.168.0.55 primavera-vm.demo

    Many thanks for your time and cooperation.

    • 

      Ben Mukoro on November 21, 2016 at 1:51 pm

      Are you able to ping the primavera-vm.demo host from the VM?

13. 

    Stewart on November 21, 2016 at 1:28 pm

    Hi Ben,

    I just wanted to ask why Primavera Prime is not included in this pack? I noticed it was included in the previous releases.

    Thanks,

    Stewart

    • 

      Ben Mukoro on November 21, 2016 at 1:49 pm

      Hi Stewart

      It was not released at the time..
      I am still evaluating releasing a 16.2 vm that may include Primavera Prime.

      Thanks ben

14. 

    Imran on November 21, 2016 at 8:09 pm

    Hi Ben,

    Cheers for yours response. Please see below when I ping

    [oracle@primavera-vm ~]$ ping primavera-vm.demo
    PING primavera-vm.demo (172.16.10.94) 56(84) bytes of data.
    ^C
    — primavera-vm.demo ping statistics —
    6 packets transmitted, 0 received, 100% packet loss, time 5529ms

    Please advise.
    Many Thanks

15. 

    Arfeen Ali on November 24, 2016 at 3:30 pm

    Does this VM contains sample projects and demo data for primavera eppm and primavera unifier?

    Regards

    • 

      Ben Mukoro on November 29, 2016 at 7:40 pm

      Sample projects for P6 EPPM only.